GR1 User Manual
What's in the box
<Placeholder for What's in the box picture>
- GR1 Light
- USB-C Charging Cable
- Adjustable handlebar mount
- Action camera mount adapter
Optional Accessories
We have a host of accessories available for the GR1
- Helmet mount kit (with curved and flat adhesive mounts for most helmet types)
- Helmet strap mount (removable option compatible wide variety of helmets)
- Spacer mount (a machined aluminum mount for trail riding)
-
Dual port USB-C fast charger
Charging your GR1
NOTE: For maximum battery life, charge the light in ambient temperatures between 5 degrees celsius and 40 degrees celsius.
Open the USB-C rubber cover at the back side of the light. Insert the USB-C cable into the light and then connect to a USB-C charger.
The light is charging when the button is flashing red. The button will turn green when charging is complete.
Close the rubber cover over the USB-C connector to ensure waterproof capabilities
<Placeholder for picture>
NOTE: for the first use, charge the light for 2 hours.
Mounting your GR1
Attach the mount to the handlebar as pictured below, and tighten the nut.
<Placeholder for picture>
Slide the bottom of the light into the bracket. When you hear a “click” sound, the light is correctly mounted.
To aim the light vertically, loosen the nut slightly, rotate the light up or down to adjust the angle of the light. Adjust the light angle so the beam is roughly parallel to the ground.
For handlebars with high sweep, the light can be rotated horizontally to ensure it’s facing forward.
<Placeholder for picture>
Using your GR1
Battery state of charge indication: Quick press the button and the indicator will light for 5s when the light is turned off
| Battery Charge | Indicator Colour |
|---|---|
| 100% to 61% | Green |
| 60% to 21% | Yellow |
| 20% to 1% | Red Flashing |
Power On/Off: Press and hold the button for 0.75s.
To change modes: When the light is on, quick press the button to change modes (low - medium - high - cycle).
Daytime flash mode: Press and hold the button for 2s to enter and exit the daytime flash mode.
| Mode | Brightness (lumens) |
Runtime (hours) |
|---|---|---|
| High | 1300 | 2 |
| Medium | 500 | 5 |
| Low | 250 | 12 |
| Daytime Flash | 500 | 30 |
Straight to high mode: When the light is on and in any other mode than high, double press the button to directly enter into the high mode. Single press the button to return to the previous mode.
Mode Memory: When you turn the light on, it will resume the last mode that was used.
Ship/travel mode: Press and hold the button for 5 seconds. The light will be locked to avoid accidentally turning on when packed for shipping or travel. When locked a short press will show the stage of charge on the button, but otherwise the light will not function until unlocked. There are two ways to exit sip/travel mode. Either press the button 5 times quickly within 3 seconds and the light will enter daytime flash mode, or plug the light into a charger
Pass-through charging mode: Plugging in the light while in use automatically switches it to low mode. This ensures the battery receives enough power to charge while operating. Similarly, if you turn the light on during a charge cycle, it will only operate in low mode.
Light Protection Features
The GR1 is equipped with a host of protection capabilities including; overcharge protection, overdischarge protection, overcurrent protection, short circuit protection, high temperature protection
For over temperature protection the light will dim to medium mode if left in high mode while in still air. When the light cools it will return to normal operation.
Questions
Please Contact Us if you have any questions